Klüber Summit PGS 68
Synthetic gas compressor oils
Product description
Klüber Summit PGS compressor oils are based on polyalkylene glycols and special additives. In high-pressure piston compressors for natural gas or hydro carbonated process gas, mineral oils are easily absorbed into, and diluted by, the gas stream. By contrast, Klüber Summit PGI compressor oils are extremely resistant to such effects.
Benefits for your application
-
For the lubrication of piston, screw-type and rotary vane compressors for natural and process gas
-
Compared with mineral oils, extremely resistant to dilution and absorption by hydro carbonated gases
-
Klüber Summit PGS-2 is ideal for heavy gases (densities > 1.5 g/cm³)
Klüber Summit PGS 10A
Synthetic oil, particularly for the lubrication of mechanical seals in process gas compressors and other units
Product description
Klüber Summit PGS 10A is a special polyglycol oil for the lubrication of mechanical seals. What makes this product stand out are its very low gas solubility and good cold flow properties. The base oil contained in Klüber Summit PGS 10A shows a high chemical stability with aggressive gas constituents, which may contact the oil.
Benefits for your application
-
Reliable lubrication tailored to meet the requirements in mechanical seals
-
Miscible with Klüber Summit PGS, PGI and NGL gas compressor oils enabling safe and reliable operation
-
Low temperature start-up of equipment due to the good viscosity-temperature behaviour of the oil
-
Special additives prevent residue formation in the seal clearances
