Klüber Summit R 100
Synthetic compressor oils, particularly for highly loaded ammonia and CO2 refrigeration plants
Product description
Klüber Summit R series lubricants are based on polyalphaolefins. No paraffin is contained in the formulation of this lubricant. However, we cannot rule out the possibility that the lubricant contains traces of paraffin. Depending on the application, we recommend consulting with us. They offer good cold flow properties. They contain base oils of high chemical stability and show a low tendency to evaporation.
Benefits for your application
-
Low maintenance costs due to extended oil change intervals and reduced oil consumption
-
Easy compressor oil conversion due to neutral behaviour towards seals
-
High efficiency of the refrigeration plant due to reduced oil deposits
-
Low operating costs due to long service life of filters and oil separators
-
Wide range of application with evaporating temperatures, in some cases down to ≥-50°C
-
Meets NSF H1 requirements for use in the food-processing industry (except for Klüber Summit R 500 and R 600)
Klüber Summit PS 400
Semi-synthetic air compressor oils for oil change intervals up to 5,000 operating hours
Product description
Klüber Summit PS oils are air compressor oils based on hydrogenated mineral oil, synthetic ester oil and additives. Klüber Summit PS oils are miscible with mineral oils and synthetic hydrocarbons, but not with oils based on polyglycol.
Benefits for your application
-
Low maintenance and operating costs due to oil change intervals up to 5,000 operating hours in
oil-injected screw-type compressors -
Easier compressor oil changeover due to neutral behaviour of oils towards seals
-
Good soil dissolving capacity, clean oil circuit due to the ester content in the oil, reduction of cleaning costs
-
Low formation of oxidation residues in the oil circuit, reduced operating costs due to extended oil filter and separator life
