以上图片及文字来源于上海淞江减震器集团网站http://www.60547771.com/如有任何疑问请联系周工021-60547771
asme b16.5标准法兰接管，水冷却器进回水口橡胶接头
橡胶接头又可称为：可曲挠橡胶接头、橡胶软连接、软接头、柔性橡胶接头、橡胶膨胀节、避震喉、减震器等，是一高弹性、高气密性、耐介质和耐气候性的管道连接件。
橡胶接头一般由内胶层、织物增强层（增强层有多层刮胶锦纶帘子布）、中胶层、外胶层、端部加固金属环或钢丝圈，经高温、高压硫化成型后，与金属法兰或平行接头松套组合而成的复合橡胶管。此产品利用了橡胶的高弹性、高气性、耐介质性、耐候性和耐辐射性等优点，可降低管道的振动及噪声，并可对因温度变化引起的热胀冷缩起补偿作用。
根据介质不同所采用的橡胶材质也不同，有天然胶、丁苯胶、丁基胶、丁腈胶、三元乙丙胶、氯丁胶、硅橡胶、氟橡胶等等。分别具有耐热、耐酸、碱、耐腐蚀、耐磨、耐油等功能。
上海淞江减震器集团是国内**批制造管道减振设备的厂家，主要生产橡胶接头、可曲挠橡胶接头、阻尼弹簧减振器、橡胶隔震器、金属和非金属补偿器、管道伸缩器等管道减振给排水设备。技术创新是淞江集团多年来孜孜不倦的追求，也正是淞江产品深受市场一致好评的根本原因。
B16.5 ASME standard flange connecting pipe, water cooler inlet and outlet rubber joint
Rubber joint can be called: flexible rubber joints, rubber soft connection, flexible joint, flexible rubber joints, rubber expansion joint, shockproof throat, shock absorber, is a high elasticity, high gas tightness, medium resistance and resistant climate pipeline connecting piece.
Rubber joints in general by the inner rubber layer and fabric reinforced layer (enhanced with a spectrum of squeegee nylon cord fabric layer) and layer and outer layer, end reinforced metal or the steel wire ring, after high temperature, high pressure vulcanization molding, and metal flange or parallel joints loose set of combination and compound rubber tube. This product uses the rubber of high elasticity, high gas, resistance, medium resistance, weather resistance and radiation resistance etc. advantages, reduce the vibration and noise of the pipeline, and the thermal expansion due to temperature change caused by the shrinkage compensation action.
According to the different media used in the rubber material is also different, with natural rubber, styrene butadiene rubber, butyl rubber, nitrile rubber, ternary ethylene propylene rubber, chlorine butyl rubber, silicone rubber, fluorine rubber and so on. Respectively with heat, acid, alkali, corrosion resistance, wear resistance, oil resistance and other functions.
