|
Cable conducting oil (ESSOTHERM) 500 is a high quality heat transfer oil, is recommended for oil average temperature does not exceed 315oC body enclosed system. For open systems, the proposed maximum average temperature of the oil body 180oC. Because of its low volatility, low temperature performance, low corrosion, relatively low viscosity and good heat transfer characteristics, Esso conducting oil (ESSOTHERM) 500 for most common applications.
Esso conducting oil (ESSOTHERM) 500 is a wide range of heat transfer applications. As long as the temperature does not exceed its limit, Esso conducting oil (ESSOTHERM) 500 of the thermal stability and long service life, will not be fouling formation or viscosity increase.
Esso features and advantages of conducting oil (ESSOTHERM) 500 Esso brand is an important special oil products, its application in the harsh conditions of stability and reliability of known quality. The refining process is the use of modern products with excellent quality this is a key factor. Like other products such as Esso, Esso conducting oil (ESSOTHERM) 500 in accordance with the highest quality control standards for production.
Esso conducting oil (ESSOTHERM) 500 has the following advantages:
- Thermal cracking high-performance, long product life and thus can ensure trouble-free system operation
- As the excellent thermal properties and relatively low viscosity, high heat transfer of the product, high operating efficiency
- Low temperature performance, easy-to-cold start
- In strict accordance with our quality management system (PQMS) production quality control standards
Application Esso conducting oil (ESSOTHERM) 500 is recommended for the following applications:
- The highest average body temperature of 315oC oil and air pressure to run a variety of industrial processes using cold oil seals, closed indirect heating and cooling system.
- For most of the general heat transfer applications
- The average temperature in the oil body where no more than 180oC, Esso conducting oil (ESSOTHERM) 500 can be used for open systems
- At higher temperature, oil life will be shortened, because when the temperature exceeds the recommended temperature limit, the thermal degradation rate will increase significantly.
- Esso conducting oil (ESSOTHERM) 500 can be used for minimum shutdown temperature of not less than-6oC the device
Typical properties
(ESSOTHERM) 500 Esso conducting oil (ESSOTHERM) 500 |
|
|
ASTM D 445 Viscosity, ASTM D 445
|
|
cSt @ 40oC
|
30.4 30.4
|
|
c cSt @ 100oC
|
5.4 5.4
|
|
Pour point, oC, ASTM D 97
|
-6 -6
|
|
Flash point, oC, ASTM D 92
|
230 230
|
|
And in value, ASTM D 974, mg KOH / g
|
0.05 0.05
|
|
ASTM D 4052 Density, 15oC, kg / l, ASTM D 4052
|
0.857 0.857
|
|
Micro carbon residue - Kangs method, wt%, D 4530
|
|
|
